Entity fluid_phase_vaporEntity fluid_phase_vapor
Attribute Flags Data Type
From fluid_phase:
data_collection IV set[0 .. N] of (data_collection)
Indicates the data collections that include this
instance of E and P data.
graphical_element IV set[0 .. N] of (graphical_element)
Specifies one or more graphical elements which
are depicting this data item.
datum_for_ranking IV set[0 .. N] of (object_ranking)
Indicates that an object is being used as a basis
for comparison with another object.
object_of_ranking IV set[0 .. N] of (object_ranking)
Indicates that an object is being classified in
a rank order based on its characteristics.
description I ndt_comment
A remark about the reservoir fluid phase.
identifier MI ndt_name
The name of the fluid phase, which may be used
to distinguish between phases of the same kind,
such as two aqueous or surfactant phases.
fluid_system I fluid_system
This is the fluid system from which these fluid
phases have evolved. The characteristics of all
fluid phases together (i.e., total density) are
defined in the fluid system.
fluid_system_state I fluid_system_state
This defines the environmental conditions (pressure,
temperature, etc.) that were used to define this
fluid phase.
fluid_phase_composition IV set[0 .. N] of (fluid_phase_composition)
These are the fractions of the fluid pseudo components
that describe the composition of the fluid phase.
immobile_for IV set[0 .. N] of (two_phase_rock_fluid_interaction)
The set of two phase rock fluid interactions for
which this fluid phase is an immobile phase.
fluid_phase_interface IV set[0 .. N] of (fluid_phase_interface)
These are the interfaces with other fluid phases
defined for this fluid phase. Characteristics
such as interfacial tension and equilibrium ratios
are defined at these interfaces.
intermediate_wets IV set[0 .. N] of (three_phase_rock_fluid_interaction)
The set of three phase rock fluid interactions
for which this fluid phase is the intermediate
wetting phase.
nonwets_capillary_pressure_point IV set[0 .. N] of (capillary_pressure_point)
This fluid phase is designated as the nonwetting
phase for a capillary pressure at a single saturation
point.
nonwets_two_phase IV set[0 .. N] of (two_phase_rock_fluid_interaction)
The set of two phase rock fluid interactions for
which this fluid phase is the nonwetting phase.
nonwets_capillary_pressure_curve IV set[0 .. N] of (capillary_pressure_curve)
The set of capillary pressure curves for which
this phase is designated as the nonwetting phase.
nonwets_three_phase IV set[0 .. N] of (three_phase_rock_fluid_interaction)
The set of three phase rock fluid interactions
for which this fluid phase is the nonwetting phase.
wets_fluid_rock_system IV set[0 .. N] of (rock_fluid_interaction)
The set of rock fluid interactions (one, two or
three phase) for which this fluid phase is the
wetting phase.
wets_capillary_pressure_point IV set[0 .. N] of (capillary_pressure_point)
This fluid phase is designated as the wetting
phase for a capillary pressure at a single saturation
point.
wets_capillary_pressure_curve IV set[0 .. N] of (capillary_pressure_curve)
The set of capillary pressure curves for which
this fluid phase is designated as the wetting
phase.
measured_flow_stream IV set[0 .. N] of (measured_flow_stream)
These are the measured fluid flow streams that
describe the behavior of this fluid phase at a
port of a product flow network. Time dependent
pressure and temperature measurements are made
at the port as well as descriptions of volumes,
rates and densities.
target_flow_stream IV set[0 .. N] of (target_flow_stream)
These are the target fluid flow streams that describe
the behavior of this fluid phase at a port of
a product flow network.
fluid_saturation_condition IV set[0 .. N] of (fluid_saturation_condition)
These are the descriptions of saturations in rock
fluid features (i.e., reservoirs), cores, cuttings,
etc. that use this fluid phase.
reference_for_ratio IV set[0 .. N] of (pty_fluid_phase_ratio)
These are the fluid phase ratios that use this
phase in the denominator of the ratio. These ratios
use this phase as the reference fluid phase.
well_test_recovery IV set[0 .. N] of (well_test_recovery)
This provides the volumes of this fluid phase
recovered during the course of testing a well.
pty_fractional_flow IV set[0 .. N] of (pty_fractional_flow)
may have a property of
pty_saturated_compressibility_point IV set[0 .. N] of (pty_saturated_compressibility_point)
may have a property of
pty_volumetric_thermal_expansion IV set[0 .. N] of (pty_volumetric_thermal_expansion)
may have a property of
pty_density_molar IV set[0 .. N] of (pty_density_molar)
may have a property of
pty_fluid_compressibility IV set[0 .. N] of (pty_fluid_compressibility)
may have a property of
pty_density_gradient IV set[0 .. N] of (pty_density_gradient)
may have a property of
pty_thermal_conductivity IV set[0 .. N] of (pty_thermal_conductivity)
may have a property of
pty_saturated_compressibility_curve IV set[0 .. N] of (pty_saturated_compressibility_curve)
may have a property of
pty_transient_volume IV set[0 .. N] of (pty_transient_volume)
may have a property of
pty_specific_volume_mole IV set[0 .. N] of (pty_specific_volume_mole)
may have a property of
pty_mass IV set[0 .. N] of (pty_mass)
may have a property of
pty_refractive_index IV set[0 .. N] of (pty_refractive_index)
may have a property of
pty_electric_resistivity IV set[0 .. N] of (pty_electric_resistivity)
may have a property of
pty_fluid_phase_distribution IV set[0 .. N] of (pty_fluid_phase_distribution)
may have a property of
pty_saturated_fvf_curve IV set[0 .. N] of (pty_saturated_fvf_curve)
may have a property of
pty_saturated_fvf_point IV set[0 .. N] of (pty_saturated_fvf_point)
may have a property of
pty_saturated_viscosity_point IV set[0 .. N] of (pty_saturated_viscosity_point)
may have a property of
pty_saturated_viscosity_curve IV set[0 .. N] of (pty_saturated_viscosity_curve)
may have a property of
surface_fluid_phase_condition IV set[0 .. N] of (surface_fluid_phase_condition)
This describes the standard pressures and temperatures
associated with a fluid phase at a producing object.
pty_dry_gas_pressure_curve V set[0 .. N] of (pty_dry_gas_pressure_curve)
may have a property of
pty_dry_gas_pressure_point V set[0 .. N] of (pty_dry_gas_pressure_point)
may have a property of
pty_wet_gas_pressure_point V set[0 .. N] of (pty_wet_gas_pressure_point)
may have a property of
pty_wet_gas_pressure_curve V set[0 .. N] of (pty_wet_gas_pressure_curve)
may have a property of
pty_dry_gas_z_factor_curve V set[0 .. N] of (pty_dry_gas_z_factor_curve)
may have a property of
pty_dry_gas_z_factor_point V set[0 .. N] of (pty_dry_gas_z_factor_point)
may have a property of
pty_dry_gas_viscosity_point V set[0 .. N] of (pty_dry_gas_viscosity_point)
may have a property of
pty_dry_gas_viscosity_curve V set[0 .. N] of (pty_dry_gas_viscosity_curve)
may have a property of
pty_dry_gas_fvf_point V set[0 .. N] of (pty_dry_gas_fvf_point)
may have a property of
pty_dry_gas_fvf_curve V set[0 .. N] of (pty_dry_gas_fvf_curve)
may have a property of
pty_wet_gas_density_point V set[0 .. N] of (pty_wet_gas_density_point)
may have a property of
pty_wet_gas_density_curve V set[0 .. N] of (pty_wet_gas_density_curve)
may have a property of
pty_gas_expansion_factor V set[0 .. N] of (pty_gas_expansion_factor)
may have a property of
pty_gas_pseudo_pressure V set[0 .. N] of (pty_gas_pseudo_pressure)
may have a property of
pty_latent_heat_of_vaporization V set[0 .. N] of (pty_latent_heat_of_vaporization)
may have a property of
pty_pseudoreduced_compressibility V set[0 .. N] of (pty_pseudoreduced_compressibility)
may have a property of
pty_pseudoreduced_pressure V set[0 .. N] of (pty_pseudoreduced_pressure)
may have a property of
pty_pseudoreduced_temperature V set[0 .. N] of (pty_pseudoreduced_temperature)
may have a property of
pty_specific_volume_mass_gas V set[0 .. N] of (pty_specific_volume_mass_gas)
may have a property of
pty_wet_gas_z_factor_curve V set[0 .. N] of (pty_wet_gas_z_factor_curve)
may have a property of
pty_gas_gravity V set[0 .. N] of (pty_gas_gravity)
may have a property of
pty_volatile_oil_gas_ratio V set[0 .. N] of (pty_volatile_oil_gas_ratio)
may have a property of
pty_viscosity_kinematic V set[0 .. N] of (pty_viscosity_kinematic)
may have a property of
pty_wet_gas_z_factor_point V set[0 .. N] of (pty_wet_gas_z_factor_point)
may have a property of
pty_density_vapor V set[0 .. N] of (pty_density_vapor)
may have a property of
M - mandatory, U - unique, I - inherited, V - inverse, N - named type
| INDEX | august | POSC | Mobil | ABOUT |
|---|